There are many energy-saving technologies for energy-saving water dispensers, among which the important technical application is the tankless instant-on energy-saving water dispenser, which applies the principles of vapor-liquid two-phase flow heating, integral heating and gradient heating to liquid heating, which can be continuously heated. The liquid is in the critical state of liquid-vapor two-phase in the flow, so that the liquid can be continuously heated in a short time. Then the energy-saving water dispenser manufacturers will analyze the advantages for you:

1. When the boiling water flows through the heat exchanger, the boiling water and the cold water exchange heat energy, the boiling water releases the heat energy, and the cold water absorbs the heat energy of the boiling water, so that the cold water is preheated to 80 ℃ ~ 85 ℃ before entering the water tank, and the boiling water becomes Warm water flows out through the water dragon. At this time, if you want to boil the cold water, you only need to heat it at 20 ° C ~ 15 ° C, which saves electricity and water heating time at the same time, and achieves the purpose of energy saving.

2. Energy-saving water dispenser has energy saving and electricity saving: unique heat energy exchange and recovery technology, changing the traditional water dispenser to allow boiled water to cool naturally before drinking; after the water is recovered by heat energy exchange, it can save a lot of drinking water and electricity expenses: a unit of 500 people, with Bottled water costs 7,950 yuan a month, while using an energy-saving water dispenser costs only 50 yuan a month. In addition, in terms of electricity consumption, energy-saving water dispensers have the same power saving advantages compared to bottled water dispensers. Under the same water consumption conditions, at least 50% of the electricity bill can be saved for users.

3. The energy-saving water dispenser can prevent the harm of secondary pollution of bottled water, which is more economical and saves money. Dense filter membrane is used to completely filter out harmful substances in water. Ready to drink, purer, safer and more convenient than boiling water. No cleaning, no pollution, no electricity, safe, hidden installation, does not take up space.

4. The energy-saving water dispenser is a purely physical filtration method, which can effectively remove various pollutants, such as bacteria, residual chlorine, heavy metals, scale, volatile substances, rust, sediment, etc., and the cost is higher than that of bottled water. It is much lower, the water tastes good, and can be drunk directly without boiling, so it is an ideal drinking water solution for families.

5. After the tap water is boiled, it can only solve the problem of bacteria, but still cannot remove pollution such as scale, heavy metals, volatile substances and bacterial corpses, and the water quality of drinking water will not be fundamentally improved. Bottled water is expensive and not suitable for daily use at home. Bottled water is listed as daily water by a few wealthy families, but this method is too expensive and may not be as effective as an energy-saving water dispenser.