Water dispenser use and maintenance knowledge

1. No matter what type of water dispenser is used, a leakage protection switch should be configured and a solid and reliable ground wire should be connected, so that even if the water dispenser leaks, personal safety can be guaranteed.

2. When using the water dispenser for the first time, water must be supplied first, and the water can only be powered on when the water flows out of the two taps. The use of waterless water dispensers is strictly prohibited.

3. The water dispenser should be placed in a place that is well ventilated and protected from light to prevent the shell from fading.soda water dispenser

4. When moving the compressor to refrigerate the water dispenser, it should keep moving vertically. If it is to be tilted, the tilt angle should not be greater than 45 degrees.

5. When the compressor cooling water dispenser is turned off, it takes 3-5 seconds to start again.

6. When the ambient temperature (room temperature) is lower than 10°C, the cooling power supply should be turned off.

7. Do not use too much force when pressing the faucet to catch the water, so as not to fall out or damage the rotating part of the hand.

8. Do not pass the metal rod into the ventilation window of the back panel, so as not to damage the fan or cause electric shock; do not cover the fan ventilation window, so as not to damage the semiconductor refrigeration components due to poor ventilation and heat dissipation; for long-term use, turn off the power of the water dispenser to avoid Dry burning and damage to parts.

9. Children should not play by the water cooler. If necessary, replace the hot water tap with a safe one to prevent scalding children.

10. Before the user goes out for a long time, the power supply of the water dispenser must be cut off. This not only saves electricity, but also prevents electrical accidents.