With environmental pollution, the quality of drinking water is also declining year by year, so it is necessary to add a household smart water purifier at home. There are many types of water dispensers, and it is necessary to choose a smart water purifier suitable for the family in life.

What is the difference between a warm water dispenser and a warm ice dispenser

Features of warm water dispenser:

1. The special heat exchanger saves 80% of electricity;

2. Three-stage filtration of boiling water and warm water (PP cotton activated carbon activated carbon) high temperature sterilization;

3. It has a smart water control system. If the water is not boiled, there will be no water flow, avoid drinking raw water;

4. Atmospheric technology design is safer;

5. All stainless steel material, water tank molding, ergonomic design.





Features of hot and cold water dispenser:

1. Compressor refrigeration, spiral elliptical tube evaporator, high heat transfer efficiency and large cooling capacity;

2. The water quality has been treated by PP cotton, high-precision filtration, and activated carbon three-stage filtration, making it sweeter;

3. The filter element is automatically cleaned, and the water quality is fresher;

4. Atmospheric technology design is safer.

What is the normal temperature water of the water dispenser

The water dispenser uses the inner tank to boil water. There are generally two thermostats on the inner tank, one is used to prevent dry burning, and the other is used for heating and jumping off insulation. The water dispenser used in daily life can only burn less than 100 degrees and can only reach more than 95 degrees. Generally, the temperature of heating jump insulation is controlled at 80-90 degrees, but due to heat conduction, the water temperature after boiling water should be above 85 degrees. A good water dispenser should be above 90°C, and a tea dispenser can reach above 95°C. The water should not be boiled in the water dispenser for too long, because the pressure is too high and the inner pot will burst. Therefore, few machines use temperature control of 90-95°C, and only machines with excellent quality can be used.